Production Options (BLEED)

Production Options (BLEED)




 

You can assign a global bleed in ‘mm’ that will be added to every job quoted. This is managed under Admin > Configure the Factory > General > Production Options.

 


 

The following box will appear. To alter the bleed amount, enter the new amount and click ‘save’:

 


 

 

 


    • Related Articles

    • QUOTING - Custom - Advanced Production Options

      To print or download this document click here   ADVANCED PRODUCTION OPTIONS When custom quoting in PrintIQ we have to seperate access points to 'Advanced Production options'. One under the individual 'section' and one under the overall 'job' details: ...
    • Press Options - Restricting production paths calculated

      Introduction ‘Press Options’ allow setting up multiple configurations for a single physical press. In flexographic environments the number of options can be substantial, based on the cylinder options defined. At quote time, each of these ‘Press ...
    • Gutters, Outer Margins, Spine Width and bleed for the Fold Catalogue.

      GUTTERs and OUTER MARGINs These are set up to add the LIP & HEADS for a stitched signature or fold-lay; and for the GRIND & HEADS on the Perfect Bound Book. The example below is a 16p signature (fold lay) with bleed, head trim and lip. 16p Signature ...
    • Imposition Requirements - Die & Cylinder override options

      Imposition Block Repeat Overrides When quoting on digital presses that use a digital frame, a die will populate the frame based on its ‘block’ configuration. Enforcing the Nup to be die based can result in reduced frame usage and in turn, increased ...
    • Production Operation Order

        You can specify what operations appear on the quote screen and the production job bag. This is managed under Admin > Configure the Factory > General > Production Operation Order.       The following box will appear. You will see a list of all the ...